*69 Call Return - This service gives the user the convenience of recalling the last incoming call to their number automatically.

*66 Call Back Activate - This feature allows the user to place a call to the last number they tried to reach whether the call was answered, unanswered or busy by dialing an activation code. If the number called is idle the call will ring through and complete normally. If the called number is busy the user will hear a special announcement and the feature will monitor the called number for up to 30 minutes. When both lines are idle, the user hears a special ring. During the monitoring process the user can continue to originate and receive calls without affecting the Call Return on Busy request. Call Return on Busy requests can be cancelled by dialing the deactivation code.

*86 Call Back Deactivate

*72 Call Forward Activate - All calls are immediately forwarded to the designated forwarding number.

*73 Call Forward Deactivate

*76 Call Forward Busy Activate - Calls are forwarded to the designated forwarding number if the subscriber’s line is busy because of the following; Primary line already in a call, primary and secondary line in a call or conference.

#76 Call Forward Busy Deactivate

*92 Call Forward No Answer Activate - Calls are forwarded to the designated forwarding number if the subscriber’s line is not answered.

*93 Call Forward No Answer Deactivate

*63 Call Forward Last Activate - Calls are forwarded to the last incoming number that called.

*83 Call Forward Last Deactivate

*60 Block Last Activate - Blocks the last incoming call from calling again.

*80 Block Last Deactivate

*56 Call Waiting Activate

*57 Call Waiting Deactivate - Enables or Disables call waiting to function.

*67 Block Caller ID Activate

*68 Block Caller ID Deactivate – Enables or disables caller id to be delivered to the called party

*77 Block Anonymous Activate – Blocks calls from calling parties that have their number marked anonymous or private.

*87 Block Anonymous Deactivate

*25 Call Waiting Caller ID Activate – Displays incoming call waiting party’s number on caller id device.

*45 Call Waiting Caller ID Deactivate

*74 Speed Dial Activate- Program up to 8 numbers for speed dialing. Pick up the receiver & listen for dial tone.

Press *74 and dial the single digit code under which the number is to be stored (2-9). Dial the complete number to be stored just as if you were going to dial it yourself Listen for Confirmation tone (two short beeps) Hang up or repeat the sequence for the remaining numbers.